Heat Transfer Paper Cold Release Reflective Film for Sport Wear

Basic Info

Product Description

• Printing types: screen printing
• Image type: wash label, neck label, decoration label, main label etc
• Printing inks: oil based ink, water based ink, plastisol ink, hotmelt glue/adhesive, hotmelt powder
• Printing Equipment: automatic printing machine, semi automatic machine, roll to roll jumbos machine
• Applicable heat transfer materials: cottons, chemical fiber, cotton blend fabrics, EVA, non-woven fabrics, leather, and other heat resistant fabrics.

• Thickness: 75um, 100um;
• Size information: 39×54cm, 64×48cm, 50×70cm or as per customer requirements;
• Heat transfer temperature: 160 degrees or depending on the melting point of adhesives or hot melt powders used;
• Heat transfer time: 12 seconds

1. Use top quality base film, dimensional stablized, minimum shrinkage, 180C, 1 minutes heat, shrink 2~3mm
2. Excellent printing result, we have special coating to make maximum ink absord on the film;
3. Scratch resistance, coating material will not easy scratch off the film, after transfer, coating will not transfer to the fabric;
4. Excellent printing result, we make special coating material to help to maximum ink absord, ink fastness is good after transfer;
5. Professional and experience sales guide, we can provide printing technical guidance, we can help with problems happens during the printing process;
6. OEKO TEX certified, Appendix 4, class II.
7. Strict quality control system, before every shipment, we tested size stablized after 180C, 1 min; release figure, thickness after coating,coating eveness, matt degree, simple printing test or follow customer request.